Instructions

8.2.1.47 ALARm:TEMPurature<chn>:SENSor:ENABle?
Returns the state of the temperature sensor alarm enable for the specified
channel.
Example: ALAR:TEMP1:SENS:ENAB?
Response: 0
The TEMPerature suffix, <chn>, specifies the channel (1 or 2). A value of 1 is
returned if the temperature sensor alarm is enabled. A value of 0 is returned if
the temperature sensor alarm is disabled.
8.2.1.48 ALARm:TEMPurature<chn>:SENSor:ENABle <bool>
Sets the state of the temperature sensor alarm enable for the specified channel.
Example: ALAR:TEMP1:SENS:ENAB 1
The TEMPerature suffix, <chn>, specifies the channel (1 or 2). The <bool> pa
-
rameter turns the temperature sensor alarm on (1 or ON) or off (0 or OFF).
This command may be password protected (see Section 8.2.10, Password
Commands).
8.2.1.49 ALARm:TEMPurature<chn>:UPPer?
Indicates whether an upper temperature alarm event has occurred.
Example: ALAR:TEMP1:UPP?
Response: 0
The TEMPerature suffix, <chn>, specifies the channel (1 or 2). A value of 1 is
returned if an upper temperature alarm event has occurred on the specified
channel. A value of 0 is returned if an upper temperature alarm event has not
occurred on the specified channel.
8.2.1.50 ALARm:TEMPurature<chn>:UPPer:ENABle?
Returns the state of the upper temperature alarm enable for the specified
channel.
Example: ALAR:TEMP1:UPP:ENAB?
Response: 0
The TEMPerature suffix, <chn>, specifies the channel (1 or 2). A value of 1 is
returned if the upper temperature alarm is enabled. A value of 0 is returned if
the upper temperature alarm is disabled.
8.2.1.51 ALARm:TEMPurature<chn>:UPPer:ENABle <bool>
Sets the state of the upper temperature alarm enable for the specified channel.
Example: ALAR:TEMP1:UPP:ENAB 1
1620A “DewK” Thermo-hygrometer
User’s Guide
90