User manual

9100S Dry-Well Calibrator
Side View
14
RS-232 - The RS-232 serial port provides a means for connecting the instrument to a
computer or a printer using the included serial cable.
WARNING: Always leave enough clearance in front of the calibrator to allow
for safe and easy installation and removal of probes.
4.2 Side View
Prop Stand - The prop stand (Figure 2 on this page) is located on the bottom side of
the instrument and lays at against the bottom of the instrument when not in use. The
prop stand can be swung down into a standing position when using the instrument at
an inclined position.
Figure 2 Side view of the 9100S showing the prop stand
CAUTION: The prop stand was not designed to be used as a handle for carrying
the instrument. To avoid damage,do not force the prop stand beyond the inclined
position of the instrument.