Information

39
MET/TEMP II
MET/TEMP II is automated temperature calibration
software that allows you to eliminate long manual
temperature calibration processes. Test thermo-
couples (all types), RTDs, SPRTs, thermistors, and
even liquid-in-glass thermometers (LIGs). Virtually
any sensor with a resistance or voltage output
can be tested, up to 100 sensors at a time. With
MET/TEMP II software, simply place your test
sensors in a heat source, connect them to a read-
out, enter your setup information, and start the
test and return about fifteen minutes later.
• Fully automated calibration of RTDs, thermocou-
ples, thermistors and many heat sources
• Calibrates up to 100 sensors at up to 40 points
• Performs coefficient calculations and generates
tables and reports
• Reports conform to ANSI and NCSL standards
continued on back cover
SOFTWARE
LogWare III
LogWare III is a client/server application that can
be used enterprise-wide for environmental data
logging and monitoring. It records, retrieves, and
analyzes temperature and relative humidity data.
LogWare III can be installed in either a client/
server, multi-user environment or on a single PC
as a stand-alone system.
• Data from many DewKs can be logged in real
time via Ethernet, RS-232, or wireless connec-
tions
• Supports “hot-swapping,” which allows you to
remove and replace sensors without shutting
down the log session
• Exports real-time data for use with MET/CAL
calibration software
• Selectable sample interval from 1 second to 24
hours
• Selectable delayed start date/time for off-hours
real-time data logging
• Selectable end log options (to stop session after
specified time or number of readings)
• Logs all readings to a central database
• Selectable high and low alarm settings with
user defined events (can be configured to play
.WAV file or launch an application, such as pager
software, when an alarm trips)
DPC/TRACK2™ Software
DPC/TRACK2 is a specialized calibration manage-
ment database that can help you manage your
instrumentation and address the documentation
requirements of quality programs and regulations.
With DPC/TRACK2 and a 754 DPC you can:
• Manage your inventory of tags and instruments,
schedule for calibration
• Create tag specific procedures with instructions
and comment
• Load those procedures to your DPC, and later
upload the results to your PC
• Select and execute automated As-Found/As-Left
procedures in the field, automatically capturing
results
• Examine the calibration histories of your tags
and instruments and print reports
• Import and export instrument data and proce-
dures as ASCII text
• Import legacy DPC/TRACK data
Consider the 754 and DPCTrack2 bundle
(FLUKE-754/750SW BU) for big savings.
LogWare
LogWare temperature calibration software was
designed for temperature data acquisition and lets
you acquire data to your PC graphically and store
it to a text file. It also performs statistical functions
automatically on each data set. Set high and low
alarm conditions, program a delayed start time,
store a data log for a fixed number of readings or
length of time, program the acquisition interval
from 1 second to 24 hours, and then let the soft-
ware take readings from the readout while you get
the rest of your work done.
• Collects real-time data using Fluke Calibration
handheld and Tweener readout
• Calculates statistics and displays customizable
graphs
• Allows user-selected start times, stop times and
sample intervals
• Provides user-defined alarms that trip customiz-
able alarm events
• Includes tools to read/write probe coefficients
and other readout settings
MET/TEMP II Software Kit