Information

Dry-well inserts
Dry-wells are designed with a set of interchangeable
inserts that contain holes bored into them match-
ing standard diameters used for RTDs, PRTs, and
thermocouples. Each set of inserts is designed and
optimized for the size and temperature range of a
specific dry-well model. Hole patterns matching a
variety of probe sizes in both metric and imperial
units are available for each dry-well.
Precision PRTs
Fluke Calibration offers these and other precision
thermometer probes to meet the needs of a wide
variety of industrial calibration applications. When
ordering a PRT, indicate the length of the probe
and the type of readout it will connect to by adding
the following extensions to the model number: For
length use (-6 for 6 in, -9 for 9 in or -12 for 12 in).
To indicate the model of the readout use (-P for
1523/1524, -L for 1586A, –A for 914X, and –D for
917X). For example a 6-inch 5627A used with a
model 1523 Precision Thermometer readout would
be ordered as a 5627A-6-P.
5627A Precision Industrial PRT
This precision PRT for industrial applications is
vibration and shock resistant, and comes with an
accredited calibration certificate. The calibrated
accuracy is ± 0.046 °C and temperature range of
–200°C to 420 °C make it ideal for many industrial
temperature applications. This probe is available
in 6 in, 9 in and 12 in configurations and a ver-
sion with a 90 degree bend is also available for
convenience with use in tight spaces.
5615 Secondary Reference
Temperature Standards
When accuracy and temperature range are criti-
cal, the 5615 Secondary Reference Temperature
Standards are the way to go, with a calibrated
accuracy of ±0.010 °C at 0 °C and a temperature
range of –200 °C to 420 °C. These probes come
with an accredited calibration certificate. They are
available in 6 in, 9 in, and 12 in configurations.
5622 Fast Response PRTs
These RTDs have small probe diameters rang-
ing from 0.5 mm to 3.2 mm for time constants
as fast as 0.4 seconds. They meet DIN/IEC Class
A requirements for interchangeable use and also
come with an accredited calibration certificate.
Thermocouples
Fluke 700TC1 Thermocouple
Mini-Plug Kit (11 types)
For use with: Fluke 700, 720 or 750 Series
Process Calibrators, Fluke 714 Thermocouple
Thermometer.
Description: A kit of 10 mini-plug connectors:
Type J (black), one
Type K (yellow), one
Type T (blue), one
Type E (purple), one
Type R/S (green), one
Type B or Cu (white), one
Type L (J-DIN) (blue), one
Type U (T-DIN) (brown), one
Type C (red), one
Type N (orange), one
5606 Full Immersion PRT
The 5606 Full Immersion PRT is specially designed
to allow the entire probe, including the transi-
tion junction and cable, to be placed into a freezer
or furnace without damaging the probe. It has a
temperature range from –200 °C to 160 °C and a
calibration accuracy of ±0.05 °C (full range).
5622
5627A
5615
5606
ACCESSORIES
36