Manualshelf

User manual

ManualsBrandsFLUKE CALIBRATION ManualsTest Equipment6102-256 Calibrator Temperature Calibrated to Manufacturer's standards (with certificate)
57585960616263646566
53
Calibration Procedure
Calibration Procedure
“R0” is displayed.
Press “SET” then use the “UP” or “DOWN” keys until the correct nu merical 2.
setting is displayed. Press “SET” to accept the new value.
Repeat step 2 for ALPHA and DELTA. 3.
Accuracy & Repeatability 12.2.3
Check the accuracy of the Micro-Bath at various points over the calibrated range.
If Micro-Bath does not pass specification at all set-points, repeat the Calibration
Procedure.