User manual

Fluke DAQ
Users Manual
Start a Scan with Spy
Spy triggers and collects its own measurements from a
maximum of eight channels from any combination of
devices. The data is not stored and the devices that are
checked do not need to be scanned.
2680A series and NetDAQ series can operate in Spy
mode while scanning or not scanning within a
configuration file. Display updates for these models are
sub-interval to that set in the configuration file. The 2638A
and 1586A models may only be used in the Spy mode
when the units are not scanning. Display updates with
these models are made at the interval setting of the
current configuration file.
To start a Spy scan:
1. Click
on the Software toolbar. The Spy icon is
shown as the lowest item in the TreeView panel
shown below.
2. Click the Spy icon. The Spy window is shown. A
maximum of eight channels can be selected,
including DIO and totalizer.
3. Click
to start the scan. Click to stop the
scan.
38