User manual

Application Software
Manage a Network
alg104s.bmp
Note
The Software also supports 2640A and 2645A
NetDAQ devices, and 2638A and 1586A. Some
of the Software configuration dialogs may differ
from those for the 268XA.
5. In the TreeView panel, select the device just added.
6. Set the IP address or communication port number on
the Device Settings dialog shown below. Note that
the Auto (single) automatically detects and uses the
active com port under USB control when only on
USB instrument is connected. Other fields are
optional. It may be necessary to contact an Internet
support staff to determine the IP address.
17