User's Guide

admin
The password can be changed, so make sure you are using the right pass-
word. The default password is:
admin
If you forgot the password, check Section 8.3 to fix the problem.
8.3 I forgot the administrator password
If you forgot the password and need to access the Web-based interface,
you must physically access the unit, open the enclosure in a weather-safe
situation and reset to the factory default settings. Please refer to the in-
structions of Section 3.1.4 for FM1100,
Section 3.3.4 for FM1200 and Section
3.2.4 for FM3100 units.
8.4 In Bridge Mode I get no Link or the Link LED is
always red or I am getting a weak Wireless link
(below 60% signal strength)
To improve your link strength, please check the following:
• Antenna Alignment: the two antennas must be aligned toward each
other.
• Line of Sight: you must have clear line of sight between the two
antennas.
• Antenna Polarization: both antennas must have the same polariza-
tion. Check antenna polarity.
• Po
wer: check if the FM unit is properly powered-on with the provided
PoE injector.
• Channel: both FM unit units must be operating on the same channel.
62