User's Guide

Figure 7.9: Frequency Scan Tool results.
The user is warned that the proprietary Fluidmesh TPC algorithm (see Sec-
tion 7.8) will be disabled during the alignment process so as to avoid un-
wanted interactions with the tools. The antenna alignment tool consists of
a real-time graph and a bar which report the average signal strength and
the current signal strength detected at the local unit receiver, respectively.
During the physical antenna alignment process, the graph and the bar can
be monitored to obtain optimal link quality.
7.10 Frequency Scan Tool
The Scan Tool page provides a powerful tool for analyzing the status of
the radio interference in the available channels. The channel scan can be
started on each radio separately by means of the buttons at the top of the
page (see Fig. 7.9). As soon as the scanning is complete, a bar chart will
appear indicating the current interference level and the overall quality of
each channel.
45