User's Guide

Table Of Contents

to 100 Mb/s maximum throughput.

By reducing the number of slaves, the

supported rate per slave can be increased provided that the sum of the

throughput requirements of the slaves is lower than or equal to 100 Mb/s.

FluidMAX is fully automatic and integrated within the mesh architecture. By

continuously monitoring the network topology, FM units are able to auto-

matically select whether to operate the FluidMAX MAC protocol or remain

in the initial mesh operating mode. Consequently, no additional conﬁgura-

tion is needed to enable the FluidMAX features because the communica-

tion protocol is automatically chosen by the FluidMAX protocol based on

the detected network topology.

We assume the default channel width of 40 MHz.