User's Guide

Figure 3.2: Fluidmesh 1100 pole mounting adapter, Ethernet ports and
reset button.
3.1.1 Proper Installation Procedures
The FM1100 comes with a pole-mounting adapter, shown in Fig. 3.2, that
allows the installer to change the alignment of the antenna along the hor-
izontal axis. Plastic or metal tie wraps can be used to install the unit on a
pole.
3.1.2 Powering on an FM1100
The unit can be powered only with the Power-over-Ethernet injector pro-
vided with the FM1100 (Fig. 3.3). The PoE injector does not comply with
the 802.3af standard and therefore it cannot be substituted with a different
injector.
Figure 3.3: Fluidmesh 1100 Power-over-Ethernet injector.
The PoE injector must be powered 100-240V 50-60Hz AC using the AC
9