User's Manual

1 Manual Over view
This manual describes how to install and operate the Fluidmesh VOLO
and MITO series products. More specifically, this manual contains a
general overview of the Fluidmesh 1100 MITO,
Fluidmesh 1200 VOLO and
the Fluidmesh 3100 MITO in Section 3.1, Section 3.2
and Section 3.3
respectively. Please refer to Fig. 1.1(a), Fig. 1.1(b) and Fig.1.1(c) for a
representation of each product. This user’s manual also includes a
complete overview of the network architectures that can be created using
Fluidmesh technology, and is discussed in Section 4. The Fluidmesh net-
work addressing is described in Section 5. The use of Fluidmesh software
plug-ins, their features, and their installation procedures in a network fol-
lows in Section 6. The Web-based Graphical User Interface (GUI) is then
described in Section 7. Please note that, unless otherwise explicitly speci-
fied, the Web GUI presentation refers to the Fluidmesh 1100,
Fluidemesh
1200 and the Fluidmesh 3100. Screenshots shown in this manual are
explanatory examples and may be different from the ones that appear
when you run the Web-based configuration software.
(a) Fluidmesh 1100 MITO (b) Fluidmesh 3100 MITO
(c) Fluidmesh 1200 VOLO
Figure 1.1: Fluidmesh 1100 MITO, Fluidmesh 1200 VOLO and Fluidmesh 3100 MITO front view.
6