User's Manual

7.16 PoE Passthrough (FM1100 and FM1200 only)
The second Ethernet port present on the FM1100 and FM1200 can be used
to power up other passive 12-18 V PoE devices such as cameras and
FM units. This feature can be enabled through the PoE passthrough
page as depicted in Fig. 7.20.
Figure 7.20: Enable the PoE passthrough feature.
7.17 Change Password
Use this page to change the password to access the unit Web GUI.
7.18 Status
This page reportsasummary of the status of the unit. Additionally, in case
of system malfunctions, the unit’s diagnostic file dump can be downloaded
59