User's Manual

7.15 Multicast
By default, FM units operating in Mesh Point mode forward all the multicast
traffic generated by the cameras to their closest Mesh End unit. However,
in some network configurations, it may be convenient to forward the multi-
cast traffic from a Mesh Point to others, e.g., to remotely record the video
flow.
By default, the unit operating in Mesh End mode does NOT forward any
multicast traffic
7
to the wireless networks.
Figure 7.19: Add/Remove multicast routes towards Mesh Points.
To redirect a traffic flow to a Mesh Point, you must specify all the multicast
flows redirection information within the Mesh End multicast page as shown
in Fig 7.19.
7
With the exception of UPnP and IGMP traffic.
58