User's Manual

Figure 7.10: FMQuadro.
7.11 FMQuadro™ (Mesh End only)
This feature is available only in FM units configured in Mesh End mode. The
innovative FMQuadro engine provides an interactive graph representation
of the Fluidmesh network where vertices and edges represent FM units
and wireless links, respectively, as shown in Fig. 7.10. The links which are
currently in use by every packet generated/relayed by a Fluidmesh device
to reach a possible destination in the network (i.e., the routing table) are
depicted as a continuous lines.
Backup links are depicted as dashed lines, and they are not shown by de-
fault. Backup links can be viewed by selecting the appropriate field in the
top panel of the FMQuadro window.
This panel also includes other fields which can be selected to display ad-
ditional always-on link information such as the link frequency, the link error
rate, and the link quality.
47