User's Manual

7.4 MeshWizard™
MeshWizard is a simple yet effective tool to configure the basic settings of
an FM unit based on the following four steps:
1. Step 1, Fig. 7.3(a): click on the “Wizard” button to start configuring
the unit;
2. Step 2, Fig. 7.3(b): unit IP configuration;
3. Step 3, Fig. 7.3(c): wireless radio frequencies configuration;
4. Step 4, Fig. 7.3(d): settings summary and configuration save.
7.5 Web-based Interface Menus
Once logged in successfully, the general mode page will appear as shown
in Fig. 7.4. Through this page you can change the mode of operation of
the FM unit. The item list menu on the left can be used to set/modify the
configuration of the unit.
Figure 7.4: FM unit general configuration window.
37