User's Manual

Table Of Contents

The default username and a password are:

Username: admin

Password: admin

Figure 7.2: End-user license agreement.

7.3 End-user License Agreement and Region of Op-

eration

The ﬁrst time you log-in, you will be asked to accept the terms of the end-

user license agreement and select the country where you will be operating

the unit (Fig. 7.2 is an example for an FM1100 unit). You must accept the

terms of the license agreement in order to activate the device. If you do not

wish to accept the terms of the license agreement, please turn off the unit

and contact Fluidmesh Networks. Choosing a wrong country/regulatory do-

main setting may lead to an illegal wireless conﬁguration.

Once the license is accepted, the unit can be conﬁgured. Two conﬁgu-

ration methods are available as shown in Fig. 7.3(a): MeshWizard™ and

Classic. The former consists of a simple four step wizard to conﬁgure the

basic settings of the unit (see Section 7.4), whereas the latter is the classic

Fluidmesh Web-based GUI for advanced conﬁguration (see Section 7.5).