User's Manual

the Serial Number are accepted) in order to get the Activation Code. Please
refer to Section 7.13 to input the Activation Code into the unit Web interface.
To provide the maximum flexibility in the Plug-in management, Fluidmesh
allows the deactivation of any installed Plug-in in order to transfer it to an-
other Fluidmesh unit. Specifically, each Plug-in can be deactivated via the
Web interface of the unit according to the procedure described in Sec-
tion 7.13. A Deactivation Code is provided by the unit which can be input
in the Fluidmesh Plug-in Management Web Page on Fluidmesh Extranet to
generate a fresh License Code as depicted in Fig. 6.2(b). The latter can
then be used to generate a new Activation Code to activate the Plug-in for
a different unit.
31