User's Manual
Table Of Contents
3 Installation and System
Set-up
This section describes how to install and set up Fluidmesh products. Specif-
ically, the Fluidmesh 1100 MITO,
Fluidmesh 1200 VOLO and Fluidmesh
3100 MITO series are described in Section 3.1, Section 3.2
and Section 3.3
respectively.
3.1 Fluidmesh 1100 MITO Series
The Fluidmesh 1100 MITO (part number FM1100M-HW, for simplicity re-
ferred to as FM1100) is designed for wireless operations .
The hardware is multi-band panel an-tenna which can be mounted and
oriented using the supplied pole-mounting adapter as depicted in Fig.
3.1 and Fig. 3.2
Figure 3.1: Fluidmesh 1100 enclosure (back).
The FM1100 can operate both as a point-to-point wireless bridge or as
a single radio mesh unit. The former operating mode is described in Sec-
tion 4.1 whereas the latter is discussed in Section 4.2.
8