User's Manual

37
In order to run a Ping or a Bandwidth Test, write the destination IP in the proper window and
click run. Bandwidth Test is performed using 4 Mb/s UDP traffic. Both tests can be run on top of
a loaded network to test operational performances, or on top of an unloaded network to test
installed capacity.
Figure 7.19: Advanced Tools Web Page
7.17 Multicast
By default, FM units operating in Mesh Point mode forward all the multicast traffic generated by
the cameras to their closest Mesh End unit. However, in some network configurations, it may be
convenient to forward the multi-cast traffic from a Mesh Point to others, e.g., to remotely record
the video flow.
By default, the unit operating in Mesh End mode does NOT forward any multicast traffic
10
to the
10
With the exception of UPnP and IGMP traffic.