User's Manual

1
1 Manual Overview
This manual describes how to install and operate the Fluidmesh 4500 MOBI product. More
specifically, this manual contains a general overview of the Fluidmesh 4500 MOBI in Section 3.1.
This user’s manual also includes a complete overview of the network architectures that can be
created using Fluidmesh technology, and is discussed in Section 4. The Fluidmesh network
addressing is described in Section 5. The use of Fluidmesh software plug-ins, their features, and
their installation procedures in a network follows in Section 6. The FMQuadro is then described in
Section 7. Please note that, unless otherwise explicitly specified, the FMQuadro presentation refers
to the Fluidmesh 4500 MOBI. Screenshots shown in this manual are explanatory examples and may
be different from the ones that appear when you run the FMQuadro.
Figure 1.1: FM 4500 MOBI
2 Precautions
2.1 Fluidmesh Networks Products Are For Professional Use Only
Fluidmesh Networks products have been designed with safety in mind. However, if not used
properly, they can cause fires that may lead to serious bodily injuries. To avoid such accidents,
make sure that you are properly qualified to install these products.
2.2 In Case of Breakdown
In case of system breakdown, discontinue use and immediately contact your authorized Fluidmesh
Networks dealer or Fluidmesh Networks LLC directly.
2.3 In Case of Abnormal Operations
If the unit emits smoke or an unusual smell, if water or other foreign matter enters the enclosure, or
if your drop the unit or damage the enclosure, power off the unit immediately and contact your
authorized Fluidmesh Networks dealer or Fluidmesh Networks LLC directly.