User's Manual

38
Fig. 7.18 - Firmware Upgrade Web Page
7.15 Plug-In Management
The manage plug-ins page (Fig. 7.18) shows the installed Plug-ins and allows the user to add
Plug-in Activation Codes. Additionally, a Plug-in can be deactivated to, for example, transfer it
from one unit to another. Once the Plug-in has been deactivated, you will be provided with a
Deactivation Code displayed at the bottom of the page. In order to get a fresh Activation Code to
use it in another device, you must complete the unit deactivation procedure at the Fluidmesh Networks
website (www.fluidmesh.com). Please refer to Section 6 for details on the software Plug-in
activation/deactivation procedures.
Please check the license code activation video by clicking on the link below. Please note, you need to
be a registered member of the website to access this link and to generate activation codes:
http://www.fluidmesh.com/en/support/how-to-videos/viewvideo/13/tech-support/how-to-activate-a-