User's Manual

19
7.5 Web-Based Interface Menus
Once logged in successfully, the general mode page will appear as shown in Fig. 7.4. Through this
page you can change the mode of operation of the FM unit. The item list menu on the left can be
used to set/ modify the configuration of the unit.
Fig. 7.4 - FM Unit General Configuration Window
7.6 General Mode
Firmware version 6.5 supports both Prodigy 1.0 and Prodigy 2.0. Prodigy 2.0 is NOT compatible
with Prodigy 1.0. The protocol selection can be done, for back-compatibility, using the FMQuadro
General Mode Configuration page. Please make sure that all the units within the same