User's Manual
17
not wish to accept the terms of the license agreement, please turn off the unit and contact Fluidmesh
Networks. Choosing a wrong country/regulatory domain setting may lead to an illegal wireless
configuration.
Once the license is accepted, the unit can be configured. Two configuration methods are available as
shown in Fig. 7.3(a): MeshWizard™ and Classic. The former consists of a simple four step wizard to
configure the basic settings of the unit (see Section 7.4), whereas the latter is the classic Fluidmesh
FMQuadro for advanced configuration (see Section 7.5).
Fig. 7.2 - End-User License Agreement
7.4 MeshWizard™
MeshWizard is a simple yet effective tool to configure the basic settings of an FM unit based on the
following four steps:
Step 1, Figure 7.3(a): click on the “Wizard” button to start configuring the unit;
Step 2, Figure 7.3(b): unit IP configuration;
Step 3, Figure 7.3(c): wireless radio frequencies configuration;
Step 4, Figure 7.3(d): settings summary and configuration save.