User's Manual
42
Log$Message!
Description!
ethX!phy:X!is!up/down!
The!Ethernet!port!X!goes!up/down.!
chatter:!VBR:!duplicate!IP!
X?! MACX!@@>!MAXY!
at!timestamp!
Possible!duplicate!IP!X!has!migrated!from!MAC!
address!X!to!Y.!
Table 7.6 - Status Description
7.20 Ping Softdog
This page can be used to set up constant pings toward multiple destinations. If the Fluidmesh
unit detects that connectivity is lost, the users can specify whether the Fluidmesh unit must reboot
or not. This can be done by checking or unchecking the reboot checkbox. The purpose of the constant
ping is thus twofold. On one hand, it can be used to reboot the unit in case of malfunctions. On the
other hand, it can be used as a keep-alive message to multiple devices like IP phones.
7.21 Save and Restore Settings
This is a handy tool for saving and restoring Fluidmesh radio configuration. The typical scenario
of use is the substitution of a damaged unit in the field. The new unit can be configured restoring
the previously saved configuration of the damaged unit. This greatly speeds up the maintenance
process and prevents configuration errors from happening.