User's Manual

40
7.17 Multicast
By default, FM units operating in Mesh Point mode forward all the multicast traffic generated by the
cameras to their closest Mesh End unit. However, in some network configurations, it may be
convenient to forward the multi-cast traffic from a Mesh Point to others, e.g., to remotely record the
video flow.
By default, the unit operating in Mesh End mode does NOT forward any multicast traffic
10
to the
wireless networks. To redirect a traffic flow to a Mesh Point, you must specify all the multicast
flows redirection information within the Mesh End multicast page as shown in Fig. 7.20.
Fig. 7.21 - Add/Remove Multicast Routes Towards Mesh Points
10
With the exception of UPnP and IGMP traffic