User's Manual
35
7.12 Static Routes
The static routes page can be used to set static routing rules in the radio unit. This option is especially
useful with the Wi-Fi AP enabled to allow the connected clients, i) to access other Fluidmesh radios /
client devices in the network and, ii) to reach gateways (i.e. Internet gateways).
7.13 SNMP
The SNMP page can be used to configure the SNMPv2c service to run on the unit. Both walkthrough
and traps operations are supported. In case you are enabling traps on the unit, the SNMP will
periodically send out monitoring information to the specified server IP address (NMS hostname) at a
specified time interval. Please refer to the Fluidmesh MIB for more details about the SNMP information
available for the Fluidmesh units.
Fig. 7.17 - SNMP Configuration Page