User's Manual
29
Fig. 7.11 - FMQuadroâ„¢ (Mesh End Only)
This feature is available only in FM units configured in Mesh End mode. The innovative FMQuadro
engine provides an interactive graph representation of the Fluidmesh network where vertices and
edges represent FM units and wireless links, respectively, as shown in Fig. 7.11. The links which are
currently in use by every packet generated/ relayed by a Fluidmesh device to reach a possible
destination in the network (i.e., the routing table) are depicted as continuous lines.
Backup links are depicted as dashed lines, and they are not shown by de-fault. Backup links can
be viewed by selecting the appropriate field in the top panel of the FMQuadro window.
This panel also includes other fields which can be selected to display additional always-on link
information such as the link frequency, the link error rate, and the link quality.
In the graph, blue is the color of a mesh end whereas mesh points are depicted in red. The unit
color becomes yellow if any anomalous condition is detected on the unit.
Each element displayed in FMQuadro is interactive, and can be dragged and/or clicked to get
additional real-time information based on the context.