User's Manual

34
Figure 7.19: Advanced Tools Web Page
7.17 Multicast
By default, FM units operating in Mesh Point mode forward all the multicast traffic generated by
the cameras to their closest Mesh End unit. However, in some network configurations, it may be
convenient to forward the multi-cast traffic from a Mesh Point to others, e.g., to remotely record
the video flow.
By default, the unit operating in Mesh End mode does NOT forward any multicast traffic
7
to the
wireless networks. To redirect a traffic flow to a Mesh Point, you must specify all the multicast
flows redirection information within the Mesh End multicast page as shown in Fig 7.19.
7
With the exception of UPnP and IGMP traffic.