User's Manual

31
specified time interval. Please refer to the Fluidmesh MIB for more details about the SNMP
information available for the Fluidmesh units.
Figure 7.16: SNMP Configuration Page
7.14 Firmware Upgrade
Through the firmware upgrade page (Figure 7.17), it is possible to upgrade the Firmware of the
devices to the latest version available. To do so, down-load the latest Firmware upgrade file to
your PC from the Fluidmesh Networks Website at www.fluidmesh.com.
4
Select the correct file
on your hard disk, and upload it. This operation might take several minutes. The unit will
automatically reboot at the end of the upgrade process.
Upgrading a working system is always a delicate and somewhat risky operation. Fluidmesh
discourages anybody from upgrading a functional system except if there is an issue to fix.
Recommended upgrading procedure for running systems:
1. Download the latest firmware release available for your hardware/firmware family;
2. Power off the whole network;
3. Power on one device at a time;
4. Connect directly to the Fluidmesh unit to be upgraded directly through an Ethernet cable;
4
An approved Fluidmesh extranet account is required. Please register for an on-line account and contact Fluidmesh for
approval.