Installation Instructions

Table Of Contents
3.2. Fluidmesh Architecture
3.2.1. Overview
Wireless network architectures
Depending on the network design and the type of components used, the
Cisco FM3200 Endo can be used to create wireless network
architectures, including:
Point-to-point (P2P) links.
Point-to-multipoint (PTMP) sectors.
Mesh networks.
Mobility networks.
Mixed networks that are capable of using any combination of types
listed above.
The FluidMAX TDMA protocol
Individual radio transceivers can easily be assigned different roles within
the same network, using Fluidmesh’s patented FluidMAX™ technology. A
typical example of a general network architecture that uses a combination
of Fluidmesh components is shown below:
FluidMAX™ enables high-performance deployments of outstanding
flexibility. The following section shows how to build point-to-point, point-to-
multipoint and mesh networks using Fluidmesh products.
Cisco Ultra-Reliable Wireless
Backhaul FM3200 Endo
© 2020 Cisco and/or its affiliates. All rights reserved. Page 15 of 177