Installation Instructions

Table Of Contents

• Mobile-radio tooltip borders are colored according to the radio’s

performance relative to its currently configured KPI thresholds:

• If LER is less than or equal to 15%, PER is 0%, and RSSI is

greater than or equal to -81 dBm, radio performance is

optimal, and the tooltip border will be green.

• If LER is between 15% and 30% or RSSI is between -86 dBm

and -81 dBm, radio performance is acceptable, and the

tooltip border will be orange.

• If LER is greater than 30%, PER is greater than 0%, or RSSI

is less than -86 dBm, radio performance is below standard,

and the tooltip border will be red.

IMPORTANT

The KPI thresholds that govern tooltip border color cannot be

changed.

If you need to adjust KPI thresholds to custom values, you

must use FM Monitor as the primary network monitoring tool.

If a mobile radio connected to a stationary radio hands off to another

stationary radio, the tooltip representing the mobile radio will move to a

position underneath the connected stationary radio. If a stationary or

mobile radio is disconnected from the network or cannot be reached, it will

not be shown in the FM-QUADRO view.

Network connectivity links between stationary radio transceivers are

shown as lines:

• A wired LAN link is shown as a solid black line (below).

• A wireless LAN link is shown as a colored line (a typical example is

shown below).

Cisco Ultra-Reliable Wireless

Backhaul FM4200 Mobi