Installation Instructions

Table Of Contents

1. HAZARDOUS CONDITION WARNINGS

Like all other global technology vendors, Fluidmesh is required to comply

with all local health and government regulations in the locations in which

we operate. This includes meeting radio frequency (RF) exposure limits

for our products.

Our equipment is tested in accordance with regulatory requirements as a

condition to our ability to market and sell in any given jurisdiction. As an

equipment manufacturer, Fluidmesh defers to expert national and

international health organizations responsible for guidance on the safety

of RF signals, specifically the US Food and Drug Administration (FDA),

Health Canada, the World Health Organization (WHO), and other national

and global health agencies.

In May 2019, the FDA stated that there is "no link between adverse health

effects and exposure at or under the current RF energy exposure limit",

and that the current FCC RF exposure limits are sufficient to insure the

safety of users.

If any Fluidmesh hardware unit breaks down or malfunctions, emits smoke

or an unusual smell, if water or other foreign matter enters the unit

enclosure, or if the unit is dropped onto a hard surface or damaged in any

way, power off the unit immediately and contact an authorized Fluidmesh

Networks dealer for assistance.

If you are adjusting and/or controlling a Fluidmesh device using control

software such as the RACER™ interface or the device's local Configurator

interface, do not make configuration changes unless you know with

certainty that your changes will not negatively impact people or animals in

the vicinity of the device and its antennas.

Cisco Ultra-Reliable Wireless

Backhaul FM4200 Mobi