Installation Instructions

Table Of Contents

1. Log on to the Fluidmesh Partner Portal.

2. Click the Plug-ins link.

• The Plug-ins web page will be shown (Figure 78 (page

144)).

Figure 78. Partner Portal (Plug-ins web page)

3. Check the selection check-box to the left of the relevant plug-in

listing.

• The plug-in control buttons will be shown at the bottom of

the web page.

4. Enter the unit identification number (5.a.b.c) or the unit serial

number of the Fluidmesh unit in the Mesh ID - Serial Number

field.

5. Complete the plug-in activation process as shown in “Plug-in

activation” (page 139).

8.2.4. Exporting and uploading multiple Activation codes

If more than one plug-in Activation code must be uploaded to a Fluidmesh

radio transceiver unit at the same time, the need to upload codes one by

one can be avoided by exporting multiple codes, or all codes, from the

Partner Portal as a *.CSV file.

To export a collection of Activation codes from the Partner Portal as a

*.CSV file, do the following steps:

1. Log on to the Fluidmesh Partner Portal.

2. Click the Plug-ins link.

• The Plug-ins web page will be shown.

3. Convert all needed License codes and/or Deactivation codes to

Activation codes as shown in “Plug-in activation” (page 139)

4. To export only selected Activation codes, check the selection

check-boxes to the left of each plug-in that must be included in

Fluidmesh 1200 VOLO