Installation Manual

15
E: FLUSH TOILET, CHECK
BOWL WATER LEVEL
Repeat Steps 7D and 7E until
water level in bowl matches
the line when the fill valve
shuts off.
D: ADJUST THE BOWL WATER LEVEL
NOTE: “0” on roller clamp equals no refill to bowl.
TOO HIGH
TOO LOW
If the water level matches the line in
the bowl and the fill valve is STILL
FILLING, then the bowl water level is
TOO HIGH, proceed to Step 7D.
If the valve shuts off and the water
level does NOT match the line in the
bowl, the water level is TOO LOW,
proceed to Step 7D.
TOO HIGH =
TOO LOW =
Turn roller clamp with thumb
to the next LOWER number.
Turn roller clamp with thumb
to next HIGHER number.
0
8