Installation Guide

D: INSTALL LOCKNUT
Using green tool, screw locknut to
the right (counterclockwise) onto
fill valve shank (below tank).
Do Not Overtighten*.
RIGHT
E: ATTACH REFILL CLIP TO
OVERFLOW PIPE
Note: If refill tube is too long to fit
inside tank with lid closed, remove
refill tube from fill valve refill port, cut
tube and reattach to port.
Scissors
(Optional)
14
STEP 7: INSTALL NEW FILL VALVE
15
A: PUSH REFILL TUBE
ONTO REFILL PORT
B: ATTACH REFILL CLIP
TO OTHER END OF
REFILL TUBE
*
Overtightening may crack the fill valve or tank causing flooding. Make sure the float cup
does not touch the tank walls or tank lever and flush valve.
Refill Clip
Refill Tube
C: INSERT FILL VALVE
Position refill tube to face flush
valve making sure fill valve parts
do not interfere with lever arm.
TOP
DOWN
VIEW
Refill Tube
Lever Arm
Overflow
Pipe
Fill Valve
Green Tool