User Instructions

Step 1. Install Mounting Plate
A.
Dunk grommets in a cup of
water before inserting them for
easier installation.
B.
Insert double bump grommets
into the seat holes and pull from
the bottom while applying
pressure to the top.
C.
Place mounting plate on top of
grommets.
D.
Align the center of
each sliding rail, flat
side down, over the
grommet hole by
placing it in the
mounting plate slot.
E.
Secure sliding rails by inserting
screws through the grommet
hole, and loosely tighten with
screwdriver.
Peach Tip:
Place the flat
side of the
sliding rail face
down.
Peach Tip:
Mounting plate
should be firmly
attached but able
to move slightly
with screws in
place.
Peach Tip:
Insert skinny
part of
grommet.
*Add line art
image
NEED IMAGE
Need to shoot