User Instructions

Cleaning and Maintenance
If not using for a while?? Do yearly, monthly?? Why?
1. Turn off your water-supply shut-off valve and unplug the
unit.
2. Drain the tank by flushing the toilet.
3. Pull the drain rod and drain the inside of the unit.
The antifreeze can be added into the residual water in the
toilet in advance so that you can use it at ease. ???
Maintenance of back cover, lid and seat.
 Wipe with a soft cloth and water only to maintain
appearance and avoid damaging the surface of your
bidet.
 This product is plastic. Do not wipe it with dry cloth or a toilet
paper, as this may cause damage to the appearance of
the unit.
 There are electronic components in the back cover of the
product. Please pay attention to prevent water from
seeping into it, as this may lead to functional failure of the
product.
 Always make sure to keep the transmitter and receiver of
the remote control clean to avoid connectivity issues.
Nozzle Cleaning
1. While seat is unoccupied, hold down the “WATER
TEMPERATURE” button.
2. Nozzle will enter self-cleaning mode first, and then extend
fully, where it can also be cleaned manually.
3. Press the “STOP” button after 2 minutes, and the nozzle will
retract back into the base for normal use.