User Instructions

Remote Control Mount Installation
1. Once desired position is selected, drill two holes into
the wall with a 4.5 mm drill bit.
2. Insert the pointed tip of the anchor into the wall,
using a hammer if necessary, until flush with the wall.
3. Attach the remote mount to the wall using the
provided ¾” screws and a XXX drill bit.
4. Install AAA batteries into the remote control and
insert into mount.
Option 2: Using Screws
Option 1: Using Adhesive Strip
1. Wipe wall with rubbing alcohol. Do not use water or
household cleaners.
2. Remove the liner from the adhesive strip on the back
of the remote mount and press firmly to the desired
position on the wall.
Items You’ll Need:
 4.5 mm drill bit
 Hammer
 Phillips head drill bit or screwdriver
Peach Tip:
Do not use on freshly
painted walls. Wait 7
days before using
adhesive.