V-Series Mixer | End User Guide Getting Started Maintenance and Care Troubleshooting Service Parts Part No: 30590 Rev. D 06.
Yo u r customers have a vision, you want to make it happen, and Fluid M anagement can give you the answer. Fluid M anagement is a global leader in dispensing and mixing equipment used in the paint industr y, as well as, specialized equipment for the food and beverage, chemical, health and beaut y, and home improvement industr ies. Located in the subur bs of Chicago, I llinois, Fluid M anagement is a United States owned and operated company with histor ical roots to the paint industr y dating back to 1927.
©2011 Fluid Management as published work all rights reserved. Under the copyright laws, this material may not be copied, in whole or in part, without the written consent of Fluid Management. Your rights to the software are governed by the accompanying software license agreement.
Contents O nce your V-Series Mixer is installed, what’s next? In this guide, you’ll find more information to help you get the most from your new Fluid Management V-Series Mixer.
About this Guide Safety Precautions • Read this guide and all warning labels before using the machine. • Keep this guide in a safe place. • Read and adhere to all Warning and Caution labels on the machine. • Prepare, level, and clear the area where the machine will be installed. • To avoid risk of fire or injury, unplug the power before servicing electrical components. • DO NOT use mixer on or near flammable or combustible materials • DO NOT mix flammable materials.
Important Safety Information Information and Instruction Labels You should become familiar with the information labels affixed to the machine, as well as the warnings, cautions, and notes which appear throughout this guide. Read all the warning labels on the exterior and interior of the mixer. If the labels become damaged or unreadable, you may purchase replacements from Fluid Management Customer Service.
Important Safety Information Grounding Warnings • This machine draws 6.0 Amps at 120 ± 10% VAC 3.6 Amps at 220 ± 10% VAC • DO NOT modify the provided plug • Improper use of grounding plug can result in risk of electric shock. Cautions • Check with a qualified electrician or service person if grounding instructions are not completely understood or if in doubt as to whether product is properly grounded. • DO NOT use an adapter or extension cord with this product.
Getting to Know Your V-Series Mixer Technical Specifications Mix Time Buttons V1 Series Height: 26” (66 cm) LED Display Control Panel Width: 17” (43 cm) Depth: 24” (61 cm) Power On/Off Button Weight: 165 pounds (75 kg) Lid Retainer Maximum power: 120 volts, 6.0 Amps +/- 10%, 60 Hz VR1 Series Height: 27.9” (71 cm) Width: 17” (43 cm) Depth: 24” (61 cm) Weight: 117 pounds (53 kg) Serial Plate Maximum power: 120 volts, 6.0 Amps +/- 10%, 60 Hz 220 volts, 3.
Getting to Know Your V-Series Mixer Tips to improve operations These tips will help improve the operation of your V-Series Mixer: • DO NOT mix dented or damaged cans • DO NOT mix flammable materials or solvent based colorants • DO NOT run the mix without a container in place • For optimal performance, DO NOT run mixer on carpet, countertops, or tables • Seal the paint container tightly before mixing to prevent any spills • Press the red Emergency Button to stop the machine in an emergency • When the red LED
Getting Started Installation Unpacking and Set up Follow the steps on the next two pages to set up your V-Series Mixer Warnings Important: Before you plug the V-Series Mixer into a power outlet, carefully read all of the following installation instructions and the safety information. It is recommended that at least one other person assist in taking the machine off the pallet. 1 Make sure these items are available before installing.
Getting Started Installation 5a Remove the packing blocks from inside the mixer (for V1 models only) a. Carefully lift up the top cover until it rests on the front of the mixer. b. Unscrew the wooden block on the interior of the mixer between the gears and the motor (see Figure 2). c. Remove the wooden block. d. Close the top cover and reattach the latch (see Figure 1). 5b Remove the packing blocks from inside the mixer (for VR1 models only) Figure 1 a.
Basic Operations Mixing There are three mix cycles to choose from – Light, Medium, and Dark depending on the paint you are mixing. Follow these steps to begin the mix cycle for your V-Series Mixer: 1 Press the Power On/Off button. 2 Place container. a. Open the mixer door. b. Turn the can holder towards you and place the paint container inside the holder. Note: Make sure the paint container is tightly sealed to prevent spills.
Basic Operations Using the adapter The adapter is used to mix quarts and pints. Each can shape is molded into the adapter. 1 Open the adapter. Select the appropriate adapter to match the paint container size. 2 Place the paint container in adapter. Figure 8 (See Figures 8 and 9.) 3 Close the adapter and insert into the mixer can holder. Make sure the adapter handles fit against the reinforced side of can holder. (See Figure 10.) 4 Clamp both lid retainers over the adapter. Figure 9 (See Figure 11.
Accessories V-Series Mixer Adapters PAR T N UM B E R D E SCR I P T I O N 25090 Round Quart Adapter for use with VR-1 Mixer 30598 Square Quart Adapter for use with V-1 Mixer I M AG E Contact Fluid Management Customer Service for custom adapters that are available. V-Series Mixer Stands PAR T N UM B E R D E SCR I P T I O N 30740 Holds two V-Series Mixers 32340 Lifts mixer to conveyor height Fluid Management Customer Service 1.800.462.
Maintenance, Care, and Use To ensure safe, dependable operation of your V-Series Mixer follow the maintenance schedule detailed below: Clean every day: • Clean all accessible inside and outside surfaces with a mild cleaning solution. • Clean control panel surfaces with a mild cleaning solution. Every six months: • Level the machine. • Adjust belt tension as needed. • Check for dirt accumulations on motor. Remove dirt by vacuuming.
Frequently Asked Questions Equipment troubleshooting Most problems with the V-Series Mixer can be easily solved with a quick and easy solution. For instance, follow the daily cleaning suggestions in the Maintenance, Care, and Use and the Getting to Know Your V-Series Mixer section. Think about the conditions that led up to the problem. Making a note of things you did before the problem occurred will help you narrow down possible causes and find the answers you need.
Service FMDirect Fluid Management products are backed by FMDirect, our nationwide team of phone and field service engineers. Providing you with local, hands-on support, over 30 factory-direct service technicians deliver expertise when and where you need it.
Parts 1 5 7 6 2 4 3 Fluid Management Customer Service 1.800.462.
Parts ITEM N O.
Fluid Management Statement of Limted Warranty 2011 15 16 10 14 7 11 8 9 12 13 17 4 2 1 3 5 Fluid Management Customer Service 1.800.462.
Parts ITEM N O.
Fluid IndexManagement Statement of Limted Warranty 2011 A adapters 12, 13 accessories 13 C cleaning 14 connecting to power source 6 container placement 11, 12 E environmental conditions 4, 6, 7 F FCC compliance 6 features 7 feet 7, 10, 15 flammable materials 4, 5, 8, 9 FMDirect 1, 16 G grounding 6 I installation 9-10 R regulatory compliance information 6 S safety 4, 5, 6, 8, 9, 14, 15, 16 serial number 7, 16 service 16 specifications 7 stands 13 T timer 7, 8, 11, 18 troubleshooting 15, 18 U unpacking 9-10
V-Series Mixer Fluid Management, Inc. 1023 Wheeling Road • Wheeling IL 60090 p: 847.462.2466 f: 847.537.3221 www.fluidman.com Fluid Management Customer Service 1.800.462.