User guide

PARTS

GyroMixer End User Guide 57

PART NO DESCRIPTION NO REQ

A 18301 LEAD SCREW CAP 2

B 18302 KEY, 48 TOOTH GEAR (1/8” X 1/8” X 1/4”) 2

18311 FEMALE CLAMPING PRESSURE PLATE (NOT SHOWN) 1

C 18319 NYLON SPACER (3/8” X 3/4” X 1/8”) 4

D 18343 CLAMPING HANDLE PIN 1

18398 BRASS 72 TOOTH GEAR (NOT SHOWN)

EXPLOSION PROOF GYROMIXER ONLY

E 18399 STEEL 48 TOOTH GEAR 2

F 18427 THRUST BUSHING (3/8” ID X 3/4” OD) 4

18428 FLANGE BUSHING, 3/8” ID X 1/2” OD 5/16” (NOT SHOWN)

G 18429 FLANGE BEARING (1/2” ID X 5/18” OD X 1/2”) 1

H 18447 THRUST BUSHING (1/2” ID X 1” OD) 2

18451 BRASS 48 TOOTH GEAR (NOT SHOWN)

EXPLOSION PROOF GYROMIXER ONLY

I 20454 RADIAL BALL BEARING (1/2” X 1-1/8:) (NOT SHOWN) 2

21530 GEAR ARM ASSEMBLY(INCLUDES DOWEL PINS) 1

21531 UPPER STATIONARY GEAR ARM ASSEMBLY, COMPLETE,

INCLUDES BEARINGS, BUSHINGS, CLAMPING PRESSURE PLATES,

GEAT ARM ASSEMBLY AND GEARS (NOT SHOWN)

STANDARD GYROMIXER

21532 UPPER STATIONARY GEAR ARM ASSEMBLY, COMPLETE,

INCLUDES BEARINGS, BUSHINGS, CLAMPING PRESSURE PLATES,

GEAT ARM ASSEMBLY AND GEARS (NOT SHOWN)

EXPLOSION PROOF GYROMIXER ONLY

J 21533 STEEL 72 TOOTH CENTER GEAR WITH TAPPED HOLES,

INCLUDES BUSHINGS

K 21534 STEEL 72 TOOTH GEAR WITH BUSHING

(TWO FOR EXPLOSION-PROOF, FOUR FOR STANDARD)

2 / 4

21535 MALE CLAMPING PRESSURE PLATE ASSEMBLY, INCLUDES

BUSHINGS (NOT SHOWN) STANDARD GYROMIXER

21536 MALE CLAMPING PRESSURE PLATE ASSEMBLY, INCLUDES

BUSHINGS (NOT SHOWN) EXPLOSION PROOF GYROMIXER ONLY

L F0024A3B08 SCREW, FLANGE HEAD CAP (10-32 X 1/2” SOCKET WITH NYLON

PATCH)