User guide

TROUBLESHOOTING
GyroMixer End User Guide 19
Mixer will not shut off. Damaged timer relay. • Replace timer relay.
Faulty connection to the potentiometer. • Tighten connection to potentiometer.
Damaged potentiometer. • Replace potentiometer.
Mixer hums, but will not run. Insufficient current. • Verify mixer is correctly installed to a
dedicated line.
Something caught in mixer. • Check for obstructions.
Defective bearing in pulleys four arms or
main drive.
• Check each bearing for roughness.
Replace if necessary.
Defective motor. • Replace motor.
Mixer squeaks at startup, but still
runs.
Belts loose. • Check V-belt and poly-V belt
tension. Tighten if necessary.
PROBLEM POSSIBLE CAUSE ACTION