Owner manual

Fluid Management Customer Service 1 . 800 . 462 . 2466

Accutinter 1500 | 29
Basic Operations
Purging the lines
It is recommended that you complete a purge daily to ensure optimal Accutinter performance and avoid
possible mis-tints.
Smart Purge
Use “Smart Purge” for daily Purging.
This will only purge colorants that
have not been recently used.
1
From any screen choose Maintenance (F3 or F11).
2
Click on the
Purge tab.
3
Purge colorants.
Click on the
colorant to be
purged or select
All button to purge
entire system.
Click the Purge
(F3) button.
5
Click Dispense (F2).
Colorant(s) will dispense.
Prompt will appear
confirming dispense.
4
Place a container
underneath the
nozzle with nozzle
closer open.
NOTE: In the
Accutinter 1500
HS the nozzle will
open automatically
after step 5. At this
point just place the
container aligned
with the nozzle tip.
6
Click Done (Esc).