User Manual

en
9Technical Data
Type designation: FLUID CONTROL Lap 2216
Manufacturer Information RICHARD WOLF GmbH
Pforzheimer Straße 32
75438 Knittlingen, Germany
www.richard-wolf.com
[e-mail]
Software version The software can be read by certified service technicians.
Mains voltage range [V~]: 100-240
Supply frequencies [Hz] 50/60
Fuse designation: T3,15 AH, 250 V, UL-recognized, slow blow
Power consumption: Current [A] Power consumption [VA]
Normal operation 100 V 0.65 65
Normal operation 240 V 0.42 96
Protection class [I, II]: I
Application part(s) [Type B, Type BF, Type
CF]:
Type BF
1
Defibrillator protected application part
[yes/No]
No
Type of protection (IP code): 41
Classification according to Medical Device
Directive 93/42/EEC, [I, IIa, IIb, III]:
IIa
Tested to the following standards (in the
respectively valid version):
IEC 60601-1/EN 60601-1
IEC 60601-1-2/EN 60601-1-2
Operating conditions:
Temperature [°C/°F] 10-40/50-104
Relative humidity [%] 30-75
Air pressure [kPa] 70-106
Max. usage altitude above sea level [m] 3000
Suitable operating environment (EMC) Professional
Suitability for use in environments with
flammable mixtures of anesthetics (class
AP or APG).
This device is not designed for use with flammable anesthetic agents (Class AP) or
flammable anesthetic agents with oxidants (Class APG).
Suitability for use in an oxygenated envi-
ronment [Yes/No]
No
Storage conditions:
Temperature [°C/°F] 5-40/41-104
Relative humidity [%] 5-90
Air pressure [kPa] 70-106
Transport conditions:
Temperature [°C/°F] -20–60/-4–140
Relative humidity [%] 5-90
Air pressure [kPa] 70-106
Max. sound pressure level [dB (A)] 57
Max. dimensions (Width x Height x Depth)
[mm
3
]
with toggle screw 140 x 210 x 295
without toggle screw 140 x 210 x 200
Weight [kg] 4
Approved sterilization, cleaning, and disin-
fection procedures
Clean with soft cloth and surface disinfectant based on alcohol or aldehyde