User Manual

16
Device Startup
en
4.3.1 Mounting on Stand
DANGER!
Please read the instruction manual for the stand before mounting the pump on
the stand.
NOTE!
Make sure the rod of the stand has a diameter of 20-30 mm.
DANGER!
The position of the device on the stand can affect the stand's stability. If the de-
vice is mounted too high on the stand, the stand may tilt or topple. The user/op-
erator of the device is responsible for making sure the device cannot be tipped
over or otherwise become unstable.
1. Slide the pump onto the rod of the stand at the desired height. Please pay at-
tention to sufficient stability.
2. Tighten the toggle screw on the rear of the pump.
Abb. 4-1 Mounting on the stand
h