Safety Notes

Using the Urology Indication

11.12 Opening and Configuring the User Menu for the Urology Indica-

tion

User menu overviewDevice parameters are displayed and changed in the [URO settings] menu. The

following chart provides an overview over the possible settings.

1. Switch device on.

2. Press the [URO] function field. This opens the screen display of the urology in-

dication.

3. Press the [User menu] symbol (see Fig. 10-1 "Hysteroscopy indication screen

displays without connected scale"). The user menu opens.

4. Press the [URO settings] function field.

5. Press the [Factory settings] function field.

11.12.1Resetting to Factory Settings

Use the [URO settings] menu to reset the nominal pressure and the nominal flow

to factory settings.

Table 11-2

1. In the user menu, press the [URO settings] function field. This opens the Urol-

ogy user menu.

2. Press the [Factory settings] function field. The device resets the urology de-

vice parameters to the factory settings (see Table 11-2).

You can now do the following:

3. Press [Save] to save the setting. After saving, the previous menu level is auto-

matically opened.

4. Press [o] to return to the previous menu level without saving.

5. Press [Exit user menu] to return to the screen display of the urology indication

without saving.

11.13 Safety Functions

11.13.1General Safety Functions

During device operation, the function display depicts safety and warning mes-

sages. These messages refer to the handling and safety of the device during use.

Please read Chapter 13 Safety Functions for additional information concerning

the general safety functions.

Urology device parameters Urology factory settings

Nominal pressure 30 mmHg

Nominal flow 0.25 l/min

General settings

URO settings

Service

General settings

URO settings

Service

URO settings

Factory settings

OBJ_DOKU-0000006143-008.fm Seite 85 Mittwoch, 11. November 2020 2:29 14