Manualshelf

Safety Notes

ManualsBrandsFluid Control Lap 2216 ManualsElectronicsMedical Pump with RFID technology
51525354555657585960
70
Using the Hysteroscopy Indication
en
Decreasing nominal pressure • Briefly press the [-] symbol to decrease the nominal pressure in increments of
5 mmHg. Pressing the [-] symbol longer than 1.5 seconds activates scrolling of
the values in increments of 10 mmHg.
The nominal pressure can also be reduced with the help of the remote control
(see Chapter 6.13 "Using the Remote Control (Optional)").
Save nominal pressure value The set nominal pressure value can be saved. Next time the hysteroscopy indica-
tion is opened, the last saved value for the nominal pressure (for values 15 to
80 mmHg) is used automatically. If the nominal pressure value to be saved ex-
ceeds 80 mmHg, the nominal pressure value is reset automatically to 80 mmHg
next time the hysteroscopy indication is opened.
• Press [Save] to save the entered nominal pressure value.
10.8 Preselecting the Nominal Flow
CAUTION!
The nominal pressure cannot be reached if the nominal flow is set too low.
The nominal flow can be increased or decreased while the device is being used or
not used. The nominal flow has 2 settings, LO and HI. The hysteroscopy user
menu is used to set the values for both nominal flow levels (see Chapter 10.13
"Opening and Configuring the User Menu for the Hysteroscopy Indication").
Setting nominal flow level LO • Press the [LO] symbol to enable the nominal flow level LO. The active function
field is depicted in blue. The set nominal flow level cannot be saved.
The nominal flow level LO can also be controlled with the help of the remote
control (see Chapter 6.13 "Using the Remote Control (Optional)").
Factory setting: Nominal flow level LO=100 ml/min
Setting nominal flow level HI • Press the [HI] symbol to enable the nominal flow level HI. The active function
field is depicted in blue. The set nominal flow level cannot be saved.
The nominal flow level HI can also be controlled with the help of the remote
control (see Chapter 6.13 "Using the Remote Control (Optional)").
Factory setting: Nominal flow level HI=300 ml/min
ACTUAL PRESSURE
100 150050
SET
PRESSURE
80 mmHg
SET
FLOW
STOP
HYS
HIHIHI
LO
0
SET
PRESSURE
45 mmHg
SET
FLOW
HIHIHI
LO
ACTUAL PRESSURE
100 150050
INFLOW VOLUME
1.0
INFLOW VOLUME
52
INFLOW VOLUME
1.0
DEFICIT [ml]
0
100
%
0
0
STOPSTART
Start pump
HYS
100 ml/min
ACTUAL PRESSURE
100 150050
SET
PRESSURE
80 mmHg
SET
FLOW
STOP
HYS
HIHIHI
LO
0
SET
PRESSURE
45 mmHg
SET
FLOW
HIHIHI
LO
ACTUAL PRESSURE
100 150050
INFLOW VOLUME
1.0
INFLOW VOLUME
52
INFLOW VOLUME
1.0
DEFICIT [ml]
0
100
%
0
0
STOPSTART
Start pump
HYS
100 ml/min
ACTUAL PRESSURE
100 150050
SET
PRESSURE
80 mmHg
SET
FLOW
STOP
HYS
HIHIHI
LO
0
SET
PRESSURE
45 mmHg
SET
FLOW
HIHIHI
LO
ACTUAL PRESSURE
100 150050
INFLOW VOLUME
1.0
INFLOW VOLUME
52
INFLOW VOLUME
1.0
DEFICIT [ml]
0
100
%
0
0
STOPSTART
Start pump
HYS
100 ml/min
ACTUAL PRESSURE
100 150050
SET
PRESSURE
80 mmHg
SET
FLOW
STOP
HYS
HIHIHI
LO
0
SET
PRESSURE
45 mmHg
SET
FLOW
HIHIHI
LO
ACTUAL PRESSURE
100 150050
INFLOW VOLUME
1.0
INFLOW VOLUME
52
INFLOW VOLUME
1.0
DEFICIT [ml]
0
100
%
0
0
STOPSTART
Start pump
HYS
100 ml/min
OBJ_DOKU-0000006143-008.fm Seite 70 Mittwoch, 11. November 2020 2:29 14