Safety Notes

68
Using the Hysteroscopy Indication
en
10.6.1 Installing and Connecting the Scale
CAUTION!
The scale to be connected must be attached to the device before the device is
switched on or the device does not detect the scale.
Connect scale 1. Set scale with secretion container (4) in a stable and secure area, on a level
surface, below the device.
2. Attach the connection cable (1) of the scale to the correspondingly marked
connection socket at the rear of the device (see Fig. 5-2 "Rear of the device").
3. Turn the device on and select the HYS indication.
4. If the scale was detected, the scale symbol (an icon representing a scale) is de-
picted on the upper right of the screen.
Fig. 10-3 Connecting the scale
(1) Connection cable
(2) Instrument
(3) Apron
(4) Secretion container
(5) Scale
h
!
(2)
(3)
(4)
(1)
(5)
OBJ_DOKU-0000006143-008.fm Seite 68 Mittwoch, 11. November 2020 2:29 14