Safety Notes

ManualsBrandsFluid Control Lap 2216 ManualsElectronicsMedical Pump with RFID technology

Using Suction Function (Only Pg145)

7.3 Stopping Suction

Stop suction

Close the inflow valve of the instrument. On the indication screen, press the [0]

symbol to deactivate suction level 1 or 2.

7.4 Replacing the Secretion Container

CAUTION!

Full secretion containers must be replaced immediately without stopping sur-

gery. If the overflow protection of the secretion containers is triggered, suction

is stopped to prevent the ingress of fluids.

Container change during surgery The full secretion container can be replaced with an empty one during surgery.

1. Stop the suction (see Chapter 7.3 "Stopping Suction").

2. Replace the full secretion container with an empty one.

3. Start the suction (see Chapter 7.2 "Starting Suction").

7.5 Removing a Suction Tube

1. Remove the suction instrument tube (3) from the instrument (4).

2. Remove the secretion container (2) with the suction instrument tube (3).

3. Remove the secretion container tube (1) with the secretion container (2).

4. Remove the secretion container tube (1) from the device.

7.6 Safety Functions

Defective vacuum pump

If the suction function or vacuum pump is malfunctioning, the status line depicts

the following warning message in red: Vacuum pump defective! A long warning

beep is emitted 3 times. Surgery can be continued. After surgery, safeguard the

device until checked by an authorized service technician (see Chapter 15.4 "Aes-

culap Technical Service").

ARTHRO

SET

PRESSURE

45 mmHg

SET

FLOW

1.5 l/min

ACTUAL PRESSURE

0 50 100 150 200

START

Start pump

Knee