Safety Notes

38
Operating the Device
en
1. Using a screwdriver, open the cover on the back of the remote control.
2. Remove the old batteries and insert the new batteries in the orientation indi-
cated by the symbols on the remote control housing.
3. Replace the cover and tighten with screw.
WARNING!
Never switch polarity and make sure that the plus (+) and minus (-) poles are
aligned correctly to prevent short circuits.
NOTE!
Keep batteries in their original packaging until needed.
NOTE!
Remove the battery from the remote control if the unit will not be used for a long
period of time, the remote control may be damaged by leaking batteries.
Disposal The product must be prepared by the operator for disposal. When disposing or re-
cycling the product or its components, make sure to comply with national rules
and regulations at all times! A product labeled with this symbol must be disposed
separately according to local rules about the waste collection of electrical and
electronic devices. The disposal is carried out free by the manufacturer if within
the European Union. Please contact your local B. Braun/Aesculap representative
or distributor for additional information about the disposal of your product; see
Chapter 15 Care and Maintenance.
OBJ_DOKU-0000006143-008.fm Seite 38 Mittwoch, 11. November 2020 2:29 14